Computer Hardware problem & solution (part 2)

•

In this part we will discuss about some of the problem related to involuntary restart & shut down.

If task manager shows 80% processor use just after turn on PC 7& sometimes it turn off automatically. Then you go to bios setup of your computer & check the temperature of CPU.

Usually processor produces very high heat if it is not being properly absorbed this problem may occur. Your processor temperature may be around 90⁰ C.  This is mainly caused if heat sick cream of the processor gets melted or reduces to critical quantity. In such cases you have to add extra heat sick cream to the processor.

*After turning on the PC it displays picture of BIOS and immediately it turns off :-

It is also caused due to excess heating of PC which is not being absorbed properly. & if you try to turn on the PC immediately a bip sound occurs from motherboard. But PC does not get turn on. In such case it is better not to turn on PC immediately. Because PC does not turn on because of excess heating and if you try to turn on again and again than processor to burn due to excess heat. In this case also problem can be solved using extra head sick cream.     

Except this if PC often restarts unnecessarily:-

In such cases right click on my computer, go to properties then click on advanced tab.

Click on the settings button of startup & recovery. You can see a window. Uncheck the automatically restart option.

If yet the problem is not solved:-

1)      Check the power supply cable & power supply Box.

2)      If at the time of restart 3 bip sound occurs. Then you can conclude  that the problem is because of RAM. In this case open the RAM from its slot & clean it properly. But be careful never try to wash it with Alcohol or other liquid chemical.

3)      Virus may be another cause. If the PC is infected by virus then take attempt to remove it.

Today no more. I will come with more discussion about hardware problem& solutions in future.