Tools necessary for PC assembling

• For PC assembling you may need the following tools - 
1. A Big table on which you have to assemble your PC.  It must be placed at a place where you can work from every side of the table. 
if it is not possible than work with a table placed in any safe place.

2. A screw driver set, attach different bits on the screw drivers head to prepare sraw driver of different properties.   

3. Flat & noosed Pliers  it is vary necessary.

4. Line tester.

5. Twister.

6. One Knife & blade.

7. A ordinary Digital Multimeter if it is not available you can also use an analog multimeter. It is no necessary for PC Assembling rather it is used in case of any error.

8. An extension board with 5 AMP socket, switch, fuse & indicator. Board must have at list four to five plug. Earth must be strong. Without earthling PC may get hampered.

9.  Some amount of cotton, piece of cloth, spirit, paper & pen. This are not required for PC assembling but if some problem occur after assembling these may be needed. 

This is quite sufficient for PC assembling. An experienced Assembler may not need many of the tools.