Assemble your own PC in low cost.

• The materials you would need to make a PC are as follows:-

1. An ATX Cabinet with SMPS.
2. Motherboard & processor. (According to your budget)
3. Hard disk. (With suitable memory)
4. DDR II or III RAM according to your Motherboard.
5. LCD Monitor.
6. DVD drive.
7. UPS.
8. SATA cable & AC Power cord.

At first open the ATX cabinet, you will find some screw. Carefully attach Motherboard in cabinet with the help of screw. Put the RAM on its slot & cheek if all the locks are closed. Open the lock of processor socket & put processor on the socket & close the lock. And attach heat sick & fan on the processor. Connect the fan to Motherboard. Attach hard disk on the cabinet by screw (don't make the screw very tight.) .Attach DVD drive in proper place.

 Now connect Motherboard to the SMPS via 20/24 pin Power jack. Connect power cable to HDD & DVD Drive. Now connect sata cable to hard disk & DVD drive. Insisting on Motherboards guide book  connect HDD LED, Power LED, Power jack & Reset Jack.

Now Connect Monitor signal cable to the Motherboard. Connect Monitor & System box to the UPS. After turn on monitor & System box Go to BIOS option, Select DVD drive as  first boot device & Hard disk as Second boot device. Save your BIOS setting. Insert bootable disk in your DVD drive. Format the hard disk and load operating system. Install the entire Motherboard driver (like Sound, Graphics etc.) 

In case any problem arises plz publish your problem as a comment. I will help you.

Next time I will publish a blog about PC troubleshooting.